Product Description:

The MDD065D-N-060-N2M-095GB1 is a synchronous servomotor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. It works with digital drive controllers to provide position and velocity control in automated machinery. The motor converts electrical energy into mechanical rotation, supplying regulated torque for indexing tables, packaging axes, and material-handling stages in industrial automation lines. This arrangement supports repeatable motion on equipment that must start, stop, and reposition accurately during production.

Its rated rotational capability reaches 6000 rpm, letting the axis attain high linear feed rates when paired with suitable mechanics. At standstill, the motor can supply 2.7 Nm of continuous torque, which indicates the sustained load it can hold without thermal overload. The motor uses size 065, and length code D provides more active stack height than shorter versions in the same frame. Mechanical centering is handled by a 95 mm pilot for concentric alignment, while power and feedback cables exit on side B. Electronic position data are returned through Digital servo feedback (DSF), allowing fine-resolution control inside the drive, and the sealed connector interface keeps the electrical connection protected at the housing.

For holding at standstill, the motor includes a blocking brake with 3.0 Nm of torque to prevent vertical or overhung loads from drifting when power is removed. Motion tracking over multiple revolutions is handled by an integrated multiturn absolute encoder, so homing is not required after a restart. The drive side uses a plain shaft with a shaft seal to limit lubricant escape and contaminant entry. A molded connector supports quick electrical hookup, and because the motor does not have a shaft end on side B, couplings and driven elements are arranged only on the drive side.