Product Description:

The MDD065D-N-060-N2M-095GB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it delivers closed-loop electrical-to-mechanical conversion so that automated axes achieve precise velocity and position control. The motor is used in packaging stations, circuit-board handlers, and light machine tools where compact size and consistent torque response are required.

This model reaches a nominal speed of 6000 rpm, allowing high surface velocities on small-diameter tooling or belt pulleys. At standstill, it can generate 2.7 Nm continuously, enabling stable holding or slow-speed feed without overheating. A centering diameter of 95 mm aligns the flange to mounting faces so runout remains within tolerance. Power and feedback leads exit on side B, simplifying cabinet layouts when the drive controller is mounted behind the machine frame. The rotor uses a plain shaft, which accepts clamp or keyed couplers without additional machining. Standard dynamic balancing minimizes vibration, and the 065 frame size keeps the overall envelope small.

The motor reports position through an integrated multi-turn absolute encoder, and its signals are transmitted as digital servo feedback (DSF) to the controller for high-resolution commutation and diagnostics. Mechanical length follows motor length code D, indicating an extended stator stack for higher power than shorter versions. The motor has a shaft seal to prevent oil or coolant from migrating along the shaft-hub interface during washdown or flooded-cut operations. The housing is supplied in the standard style, and the unit comes without a blocking brake, so external locking or drive-torque holding must be used when power is removed. Connection to the machine harness is made through a single circular connector, which preserves environmental sealing.