MDD065D-N-060-N2M-095GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911270965
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
45 Seconds
The Bosch Rexroth Indramat MDD065D-N-060-N2M-095GA1 is a motor from the MDD Synchronous Motors series and features a nominal speed of 6000 rpm and continuous torque at standstill of 2.7 Nm. It includes an integrated multiturn absolute encoder, a holding brake with 3.0 Nm torque, and utilizes a connector on Side A for its connection. The motor also comes with a 95 mm centering diameter and employs digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065D-N-060-N2M-095GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is used with digital drive controllers to convert electrical energy into tightly regulated rotary motion for pick-and-place modules, compact gantries, and other automation axes that require high speed and accurate positioning. Because the motor is built for closed-loop servo use, it supports precise response to changing command signals during acceleration, deceleration, and steady running. This makes it suitable for repetitive motion tasks where consistent position and speed control are important.
The motor mounts with a centering diameter of 95 mm, which helps keep the housing concentric with surrounding mechanics during installation. Rotor balancing is supplied in the standard grade, so vibration remains low across the rated speed range. At standstill, the unit delivers 2.7 Nm of continuous torque before thermal limits are reached. During operation, the shaft can attain a nominal speed of 6000 rpm, which supports fast indexing duty and short cycle times. Power and feedback connectors exit on Side A, which can help when cable routing must stay on one end of the motor. Electrical power is routed through a single Connector, and the housing and shaft end use the standard design. A shaft seal is fitted to resist coolant or dust ingress, while motor size 065 with length code D sets the overall envelope and stack length.
Application safety is provided by an integral blocking brake that generates 3.0 Nm of holding torque when the drive is disabled. Position data is supplied by an integrated multi-turn absolute encoder, allowing the axis to retain position after a power loss and reducing the need for a reference move at startup. That signal is carried through the motor’s digital servo feedback interface for closed-loop operation with Indramat drives. Mechanical output is delivered through a plain shaft, which supports couplings or pulleys that rely on a friction fit rather than keys. This shaft style is suited to applications that use clamping hubs or other non-keyed transmission elements.
Frequently Asked Questions about MDD065D-N-060-N2M-095GA1:
Q: What type of encoder is used in the MDD065D-N-060-N2M-095GA1 motor?
A: This model uses an integrated multiturn absolute encoder for precise position feedback.
Q: Does this motor include a holding brake and what is its torque?
A: The MDD065D-N-060-N2M-095GA1 is equipped with a blocking brake that provides a holding brake torque of 3.0 Nm.
Q: What feedback system does the MDD065D-N-060-N2M-095GA1 use?
A: This motor features a digital servo feedback (DSF) system for electronic feedback.
Q: What is the continuous torque at standstill for the MDD065D-N-060-N2M-095GA1?
A: The rated continuous torque at standstill for this motor is 2.7 Nm.
Q: What is the nominal speed of the MDD065D-N-060-N2M-095GA1 synchronous motor?
A: The nominal speed of this motor is specified at 6000 min⁻¹.
