Product Description:

The MDD065D-N-060-N2L-095PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Engineered for digital drive controllers, it converts controlled current into rotary motion for automated axes used in packaging, material-handling, and machine-tool installations. The motor combines stator windings, a permanent-magnet rotor, a blocking brake, and an internal feedback device in one enclosure. This arrangement supports accurate speed regulation and repeatable positioning on feed drives that require fast starts, stops, and direction changes.

At standstill, the motor delivers 2.7 Nm of continuous torque, allowing the axis to hold a process load without excessive heat buildup. Under inverter control, it reaches 6000 rpm, which supports rapid indexing and high travel speed on compatible machinery. A blocking brake provides 3.0 Nm of holding torque when power is removed. Alignment to the machine interface is set by a 95 mm centering pilot, and frame code 065 identifies the mounting pattern used for this housing size. The shaft is present only on side A, and a radial lip seal helps protect the bearings from contamination.

For integration, the rotor is balanced to the standard balance grade, which helps reduce vibration during normal operation. All electrical connections use a sealed connector with left-side orientation, making cable routing easier where side clearance is limited. Position information is supplied by digital servo feedback, so the connected controller can regulate motion precisely without a separate external sensor. The output uses a keyway shaft, which provides positive torque transmission to pulleys, couplings, or similar drive elements. The motor keeps the standard series housing, so its mounting envelope remains consistent with matching machine interfaces.