Product Description:

The MDD065D-N-060-N2L-095PL0 is a motor for digital drive controllers manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Permanent-magnet excitation, combined with integrated digital servo feedback, allows tight velocity and position loops when the unit is paired with compatible drive electronics. Its housing, keyway shaft, and single-cable connection make the motor suitable for compact mounting in automated packaging lines, handling equipment, and other motion-control stations where fast acceleration and repeatable positioning are required.

Under continuous stall conditions, the rotor can produce 2.7 Nm of torque, giving stable holding force for static or low-speed tasks. During dynamic operation, it can reach a nominal speed of 6000 rpm, enabling high throughput on short-stroke axes. Accurate mechanical alignment is supported by a centering pilot of 95 mm on the output flange. The motor uses the compact 065 frame size and the longer D length code, which increases copper volume and thermal mass without changing the mounting pattern. A connector interface carries both power and encoder lines, and the digital servo feedback module relays position data to the controller. The keyway shaft is provided only on side A, which avoids unused shaft length at the rear of the rotor.

Dynamic stability is improved by standard rotor balancing, so vibration remains low throughout the speed range. All electrical terminations exit on the left side of the frame, which can simplify cable routing in multi-axis assemblies. The unit is delivered without a blocking brake, so systems that need static holding torque must use an external brake or maintain drive current. A pressed-in shaft seal protects the internal bearings against coolant splash and airborne contaminants. The housing finish matches other MDD motors in the same product line.