Product Description:

The MDD065D-N-060-N2L-095PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied in the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it delivers closed-loop torque and speed control that supports precise indexing, contouring, and rapid acceleration cycles common in modern industrial automation lines. By integrating with the drive’s power and feedback modules, the unit provides the rotary actuation required to move tooling, conveyors, or robotic joints exactly to commanded positions.

At its rated operating point, the rotor can reach a nominal velocity of 6000 rpm, allowing high surface speeds without mechanical gearing. During standstill, it can supply 2.7 Nm of continuous torque, so clamped loads remain stable under closed-loop control. A blocking brake is integrated, and its static holding capacity is 3.0 Nm, preventing back-driving when power is removed. Mechanical centering is achieved with a 95 mm pilot diameter that aligns the housing to mating flanges, while all power and signal leads exit on side B, simplifying cabinet layouts in machines where the motor is mounted against fixed panels. Standard dynamic balancing, a compliant housing, and a detachable circular connector complete the basic mechanical arrangement.

Closed-loop accuracy is supported by the integrated digital servo feedback system, which returns position data to the drive so command resolution is maintained even after a brief power loss. The motor body follows the length code D, giving a longer active stack than shorter variants and therefore higher thermal mass for sustained duty. Its 065 frame size supports compatibility with compact gearboxes and machine frames, while a molded shaft seal blocks coolant or lubricant from entering the bearing chamber. A keyed shaft end on the drive side and the absence of a secondary shaft on side B simplify coupling choices and help keep inertia low.