Product Description:

The MDD065D-N-060-N2L-095PB0 is a synchronous AC motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is intended to provide closed-loop torque and speed control on compact machine axes, pick-and-place gantries, or light machining spindles. By pairing the rotor's permanent magnets with drive-controlled current, the unit supplies repeatable motion profiles suited to the rapid start-stop cycles common in automated assembly and packaging equipment. This operating style supports accurate motion on axes that must accelerate quickly, stop precisely, and repeat the same path over many short production cycles.

The motor uses a 95 mm centering diameter to align the flange with gearboxes or mounting surfaces, and size code 065 with length code D gives it a compact profile for narrow frame installations. At standstill, it can exert 2.7 Nm of continuous torque, which helps the drive hold position while managing thermal rise. The rated operating point reaches 6000 rpm, allowing high surface speed when the motor is coupled to small-diameter tooling. Rotor balance follows a standard grade, so vibration remains within normal limits without additional trimming. A keyed shaft transmits torque, and the single shaft end on side A leaves the rear clear for plug-in power and feedback connections.

Electrical feedback is provided through Digital servo feedback (DSF), allowing the controller to process rotor position data during closed-loop operation. All terminations exit toward Side B, so cable routing can remain inside the enclosure boundary without crossing moving parts. A radial shaft seal sits behind the bearing to help block coolant or oil spray from entering the interior. Because the motor is supplied without a blocking brake, holding force during power-off must be provided by external mechanics or drive torque. The standard cast-aluminum housing and plug-in connection style also help the motor fit compact servo axes where access around the mounting area is limited.