Product Description:

The MDD065D-N-060-N2L-095PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and placed in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive current into precisely controlled rotary motion for positioning, indexing, and speed-regulated automation axes in packaging, handling, and process machines. Its electromagnetic design supports rapid acceleration while maintaining feedback-based accuracy, making the unit suited to servo loops that demand quick response and repeatable torque delivery. It can be used on indexing tables, transfer axes, and feed systems that start and stop frequently during normal machine cycles.

It delivers a continuous standstill torque of 2.7 Nm, which the stator can hold indefinitely with the rotor locked. During operation, the motor reaches a nominal speed of 6000 rpm, enabling high cyclic throughput on short-motion axes. The flange uses a centering diameter of 95 mm to align the housing accurately with gearheads or machine plates. Power, brake, and feedback leads exit on Side A, and the chosen interface is a connector that keeps wiring compact and secure. Position accuracy relies on digital servo feedback (DSF), which lets the paired controller monitor rotor position and speed in real time. Standard balancing helps limit vibration, the standard housing protects the windings, and length code D marks the longest lamination stack used in this frame size.

This version is equipped with a blocking brake that produces 3.0 Nm of holding torque, keeping vertical or oscillating loads secure when power is removed. A shaft seal is fitted to limit dust and fluid ingress at the output end, and the motor uses a single shaft end without a side-B extension. The frame is identified as 065, and the output shaft is machined with a keyway so couplings or pulleys can be fixed without slip. This shaft arrangement supports positive torque transmission where set-screw hubs would be less secure under reversing loads.