Product Description:

The Bosch Rexroth Indramat MDD065D-N-060-N2L-095PA0 is a synchronous servo motor in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it delivers commanded rotary motion for positioning, feeding, and indexing tasks in automated equipment. Used with a compatible Indramat drive, the motor converts electrical input into controlled shaft torque and speed for closed-loop axis operation. The synchronous design is well suited to automation lines that depend on quick response, steady speed control, and repeatable positioning over many operating cycles.

The centering pilot measures 95 mm in diameter, which helps align the frame accurately on the mounting surface. Cables exit on side A, and a sealed connector carries both power and encoder conductors through one interface. That arrangement also helps keep the cable outlet organized in compact machine layouts. The motor uses standard balancing and a standard housing to help limit structure-borne vibration during operation. Its D-length stator and size 065 allow continuous standstill torque of 2.7 Nm, and the rotor reaches a nominal speed of 6000 rpm for high-cycle motion. The omission of a single-ended shaft on side B shortens the package and supports installation where rear clearance is limited.

Position and speed signals are provided through digital servo feedback (DSF), which is routed directly to the drive controller for closed-loop control. Because the feedback device is integrated, the drive receives rotor position information without requiring a separate external sensor assembly. The motor is supplied without a blocking brake, so any suspended or overhauling load must be held by external means or by controlled motor current when power conditions allow it. A shaft seal helps protect the internal bearings from dust and splash at the output end. Torque is transmitted through a keyway shaft, which supports secure coupling to pulleys, pinions, or other driven elements.