Product Description:

The MDD065D-N-060-N2L-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers and converts electrical command signals into mechanical rotation for axes that require high-speed positioning in industrial automation cells. In closed-loop motion systems, the motor supports repeatable speed and position control for packaging, handling, and similar automated equipment. The D length code pairs the winding stack with the 065 frame size to fit compact machines, and the absence of a side-B shaft end simplifies coupling arrangements while keeping inertia low.

At a nominal speed of 6000 rpm, the rotor can sustain fast cycle motions suited to packaging or pick-and-place actuators. During a stop with current applied, it delivers a continuous standstill torque of 2.7 Nm, providing holding force against process loads until motion resumes. When power is removed, the integrated blocking brake provides 3.0 Nm so vertical axes remain secure. Precision alignment with gearboxes or fixtures is supported by the 95 mm centering diameter, while straightforward panel wiring is achieved because the power and feedback connectors are oriented on the left side. A sealed connector interface complements the standard housing and connector arrangement.

Position accuracy is maintained by the built-in Digital servo feedback (DSF), which returns position data to the drive for closed-loop control. The output uses a plain shaft configuration and includes a shaft seal to help prevent lubricant migration into the stator, so the motor can be mounted directly to gearheads. Dynamic balance is provided through Standard balancing, which helps reduce vibration during high-speed operation. This layout supports direct mechanical integration where a second shaft extension is not required.