Product Description:

The MDD065D-N-060-N2L-095GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated current from an inverter into precise mechanical motion on automated axes such as pick-and-place heads, small spindles, or packaging rollers. Electronic commutation, together with internal position sensing, allows the drive to maintain commanded speed and torque during rapid load changes common in production cells.

A centering diameter of 95 mm positions the flange concentrically with adjoining machine parts, and the rotor is balanced to a standard grade to limit residual vibration. The unit supplies 2.7 Nm of continuous standstill torque, giving stable force for holding or slow indexing tasks, while its winding reaches a nominal speed of 6000 rpm for high-throughput cycles. Mechanical output is delivered through a plain shaft that accepts either friction or shrink-fit couplings without the stress risers associated with keyed interfaces. Feedback is provided by digital servo feedback (DSF), transmitting absolute position data to the controller for closed-loop regulation. Size code 065 and length code D indicate a 65 mm frame with an extended active stack, and the single-ended shaft outline omits a side-B stub to shorten the overall length.

Cables exit on the left, a layout that simplifies routing when drives are installed on the cabinet’s right wall, and all power, signal, and protective earth conductors are bundled in one rugged connector. Operation continues safely in washdown or dusty zones because the front bearing region is equipped with a shaft seal to block fluid ingress. The motor is shipped without a blocking brake, so applications needing static holding must add an external brake or rely on drive torque. A standard cast-iron housing conducts heat to the mounting surface while maintaining the compact profile of the single shaft end.