MDD065D-N-060-N2L-095GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911273691
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
22 Seconds
The Bosch Rexroth Indramat MDD065D-N-060-N2L-095GA1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a nominal speed of 6000 rpm, a continuous torque at standstill of 2.7 Nm, and comes with a centering diameter of 95 mm. This motor has digital servo feedback, a standard plain shaft with seal, and a holding brake torque of 3.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065D-N-060-N2L-095GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, this motor converts commanded electrical power into precise rotary motion for positioning or velocity control in automated machinery. Its compact frame, internal feedback, and integrated brake make it suitable for packaging, handling, or printing stations that require high cycle accuracy and stable holding when the axis is idle. The device also integrates mechanical and electrical interfaces that fit standard Rexroth drive cabinets.
The mechanical interface uses a centering diameter of 95 mm, allowing concentric mounting on gearboxes or machine plates. At standstill, the motor can deliver a continuous torque of 2.7 Nm, so heat rise remains within permissible limits during static clamp or creep moves. Under rated excitation, it reaches a nominal speed of 6000 rpm, supplying high shaft velocity for short indexing times. All power and feedback leads exit on the drive side because the connection hardware is located on Side A and terminated through a single connector, simplifying cabinet wiring and reducing depth. Standard rotor balancing and a sealed housing minimize vibration and contamination at full operating speed.
To complement the continuous torque capability, a blocking brake supplies up to 3.0 Nm of holding force, keeping the axis locked during power removal without external clamps. Position data is reported through integrated digital servo feedback, enabling high-resolution closed-loop control without separate encoders. The drive end uses a plain shaft and a factory-installed shaft seal, so coupling hubs can be pressed on directly while maintaining IP protection against lubricant splash. With a frame classification of 065 and a length code D, the unit stays compact enough for multi-axis clusters while still offering the dynamic range required for rapid pick-and-place, labeling, or feeder modules in automated production lines.
Frequently Asked Questions about MDD065D-N-060-N2L-095GA1:
Q: What is the continuous torque at standstill for the MDD065D-N-060-N2L-095GA1 motor?
A: The MDD065D-N-060-N2L-095GA1 motor provides a continuous torque of 2.7 Nm when at standstill.
Q: What is the nominal speed of the MDD065D-N-060-N2L-095GA1 synchronous motor?
A: This model has a nominal speed rating of 6000 min⁻¹, supporting fast operational cycles.
Q: Does the MDD065D-N-060-N2L-095GA1 include a holding brake and what is its torque?
A: A holding brake with a torque of 3.0 Nm is integrated into this motor for secure load holding.
Q: What type and direction of electrical connection does the MDD065D-N-060-N2L-095GA1 use?
A: The connection is made via a side A connector, allowing for straightforward wiring installations.
Q: What feedback system is equipped on the MDD065D-N-060-N2L-095GA1 motor?
A: This motor features digital servo feedback (DSF) for motor position and velocity monitoring.
