MDD065D-N-040-N2M-095PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD065D-N-040-N2M-095PL0 is a motor for digital drive controllers and part of the MDD Synchronous Motors series. It features a nominal speed of 4000 rpm, a continuous torque at standstill of 2.7 Nm, and an integrated multiturn absolute encoder. The motor has a 95 mm centering diameter, a keyway shaft type, and digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065D-N-040-N2M-095PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for use with digital drive controllers and supplies closed-loop rotary motion in industrial automation where rapid positioning, stable speed regulation, and cycle accuracy are required. It is suitable for positioning axes, feed drives, and handling systems that depend on repeatable servo control during short cycle times. The motor uses frame size 065 with length code D, mounts through a 95 mm centering pilot, and uses a standard housing and rotor balancing for straightforward machine integration.
This model reaches a nominal speed of 4000 rpm, giving fast axis response when paired with an Indramat drive. At standstill, it can deliver 2.7 Nm of continuous torque, limited by thermal conditions under natural convection. Accurate machine alignment is supported by the centering pilot and by the integrated multi-turn absolute encoder, which reports rotor angle across multiple revolutions. Feedback signals are delivered as digital servo feedback, allowing the controller to close position and velocity loops without analog conversion. All power and feedback conductors exit on the left side, which can simplify cable routing when several motors share a panel. The unit is supplied without a blocking brake, so external holding must be arranged if power-off retention is required.
Field wiring is completed through a pre-fitted connector that matches standard Indramat motor cables. The single-ended shaft uses a keyway to transmit torque to pulleys or couplings, and it includes a shaft seal that limits lubricant migration and contaminant entry. The motor has a standard shaft end on side A and no secondary shaft on side B, which reduces overhung mass. This arrangement leaves the non-drive end closed and keeps the motor layout simpler for direct coupling setups. The housing, feedback hardware, and balanced rotor help maintain smooth operation during repeated motion cycles.
Frequently Asked Questions about MDD065D-N-040-N2M-095PL0:
Q: What is the nominal speed of the MDD065D-N-040-N2M-095PL0 synchronous motor?
A: The MDD065D-N-040-N2M-095PL0 supports a nominal speed of 4000 min⁻¹.
Q: What is the continuous torque at standstill for the MDD065D-N-040-N2M-095PL0 motor?
A: This model delivers a continuous torque of 2.7 Nm at standstill for stable operation under load.
Q: What type of encoder is built into the MDD065D-N-040-N2M-095PL0?
A: An integrated multiturn absolute encoder is built into this motor for precise position tracking.
Q: What kind of motor feedback does the MDD065D-N-040-N2M-095PL0 provide?
A: The MDD065D-N-040-N2M-095PL0 uses digital servo feedback (DSF) for motor feedback.
Q: What is the centering diameter of the MDD065D-N-040-N2M-095PL0 motor?
A: This motor is built with a 95 mm centering diameter for straightforward alignment during installation.
