Product Description:

The MDD065D-N-040-N2M-095PA1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Delivered as a motor for digital drive controllers, it is intended to supply tightly controlled torque and speed in automated assembly stations, packaging machinery, and general motion platforms. This operating role supports accurate axis response during repeated starts, stops, and position changes.

At a nominal speed of 4000 rpm, the rotor can follow high-frequency command changes while keeping phase alignment with the drive inverter. When the shaft is locked, it can produce a continuous standstill torque of 2.7 Nm, which indicates how much load the axis can hold without overheating. A blocking brake at the non-drive end supplies an emergency holding capability, and its static rating is 3.0 Nm. Position data is returned through Digital Servo Feedback (DSF), enabling the controller to close the loop on every electrical cycle. Mechanical centering on the mounting face is provided by a 95 mm diameter register, and the rotor is trimmed to a standard balancing quality so vibration remains within normal ISO limits. The housing follows the standard enclosure variant, power and feedback leads exit through a connector, and the shaft seal prevents oil or dust from entering the bearing zone. A single-ended shaft, without a side-B extension, is furnished for direct coupling.

The motor has size 065 and length code D, giving a compact form factor that fits light-duty gantry axes. Cabling is routed on Side A, which keeps the connectors clear of adjacent mechanics during installation. Position information is generated by an integrated multi-turn absolute encoder, so homing is not required after power loss. A keyway machined into the shaft end simplifies the use of clamp or hub couplings while preserving precise torque transmission to the driven component.