Product Description:

The MDD065D-N-040-N2M-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for integration with digital drive controllers, the unit converts electrical commands into precise rotary motion for positioning and velocity control in automated machinery. Its standard housing and balancing allow installation in compact multi-axis systems used in packaging and material-handling lines. The motor is intended for applications that require repeatable motion, stable response, and reliable operation during frequent start-stop cycles.

At standstill, the motor can deliver 2.7 Nm of continuous torque, allowing it to hold moderate loads without overheating during static clamping or low-speed movement. Once energized, the rotor can reach a nominal speed of 4000 rpm, giving the drive a wide operating range for fast indexing and positioning tasks. For emergency stops or vertical axes, the integral blocking brake supplies 3.0 Nm of holding torque to help prevent back-driving when power is removed. Mechanical alignment is simplified by a centering shoulder of 95 mm, which helps keep the motor accurately seated during installation. Protection against lubricant migration and dust ingress is provided by a shaft seal at the output end, supporting cleaner operation around the shaft interface.

Electrical and feedback conductors exit to the Right, so cable routing can be kept to one side of the axis. The position loop receives rotor data from an integrated multiturn absolute encoder, so the drive can detect position immediately after power is restored without a homing move. The motor has a size of 065 and a length code of D, which gives the unit a compact flange with a longer active section for higher torque in the same general mounting footprint. This layout supports use in pick-and-place units, transfer axes, and other machines where space is limited but accurate motion remains important.