Product Description:

The MDD065D-N-040-N2L-095PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Serving as a motor for digital drive controllers, it delivers closed-loop motion in packaging lines, gantries, and other automated assemblies. The unit converts drive current into rotary output while maintaining the fast response and positional accuracy demanded by industrial automation tasks.

Its continuous stall torque is 2.7 Nm, meaning the rotor can hold that torque indefinitely without overheating when locked in position. During normal operation it can reach a nominal speed of 4000 rpm, which is the synchronous velocity produced when the drive applies rated frequency. Mechanical integration is simplified by a centering pilot of 95 mm, and rotor balancing is factory-set to the standard grade to limit vibration at top speed. Power and feedback conductors exit on the right side, and the wiring is terminated through a sealed connector, so cabinet layouts can remain compact. The motor belongs to size 065 with the elongated D length code, and its housing is the standard style that accepts natural convection cooling.

Position data is returned through digital servo feedback (DSF), allowing the controller to correct velocity and angle each cycle. The output shaft is machined with a keyway to couple pulleys or couplings without slip, and there is a single drive end because the model is supplied without a side B shaft. Internal sealing protects the bearings, and the motor is built with a shaft seal for contamination control. Because the unit is delivered without a blocking brake, any static holding torque must be supplied by the drive or external mechanics. The connection scheme and the standard housing support installation in many mounting orientations.