Product Description:

The MDD065D-N-040-N2L-095PL1 is a permanent-magnet synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts controlled electrical power into rotary motion for positioning and speed-controlled tasks in automated machinery. Typical applications include packaging lines, handling modules, and tooling axes, where the motor works with a matched drive to provide closed-loop torque and speed control in a compact form. In these applications, stable servo response helps the axis follow commanded acceleration, dwell, and positioning sequences with consistent repeatability.

Its nominal speed is rated at 4000 rpm, so the rotor can reach that operating speed under rated conditions. A continuous standstill torque of 2.7 Nm indicates the sustained torque available without thermal overload. For static holding, the built-in blocking brake supplies 3.0 Nm of torque. Position information is provided by Digital servo feedback (DSF), which supports accurate current, speed, and position control in the drive controller. Shaft alignment is supported by a 95 mm centering diameter, and the motor uses standard balancing with a cast housing to help limit vibration during operation. Power and encoder conductors connect through a single industrial connector, and the shaft seal helps keep lubricant inside the housing.

The output shaft uses a keyway to transmit torque to couplings and other driven components. Cabling exits on the left side, which can simplify routing in tight cabinets or machine frames. The motor has size code 065 and length code D, giving this frame a longer active stack for higher power density. It also uses a standard shaft end on side A only and a standard housing style. The connector orientation supports installation in sealed digital drive systems without requiring a separate terminal box.