MDD065D-N-040-N2L-095GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD065D-N-040-N2L-095GR1 is a motor for digital drive controllers, part of the MDD Synchronous Motors series, and features standard housing with a centering diameter of 95 mm. This motor has a nominal speed of 4000 rpm, produces a continuous torque at standstill of 2.7 Nm, and comes equipped with a plain shaft and a shaft seal. It also includes digital servo feedback and a blocking brake with a holding brake torque of 3.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD065D-N-040-N2L-095GR1 servo motor belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. As a motor for digital drive controllers, it converts electrical energy from the drive into mechanical rotation for positioning or velocity loops on compact automation axes. The unit carries the standard housing and rotor balancing pattern used in this series, and it employs a single connector interface so power and feedback lines can be routed in one bundle during machine installation. This layout helps keep external wiring compact and reduces the number of separate cable runs along the axis.
These rated values describe how the motor behaves under closed-loop control. Its nominal speed reaches 4000 rpm, providing a top running speed suitable for packaging spindles and pick-and-place modules. At locked rotor, its windings deliver continuous torque of 2.7 Nm, indicating the force available for static holding or low-speed duty without overheating. Mechanical alignment in the machine frame is simplified by the 95 mm centering diameter, while cabling exits on the right, keeping connector stress away from moving members on left-mounted actuators. Position data is returned through digital servo feedback, letting the drive read high-resolution encoder counts for tight speed and position regulation. The motor size code 065 identifies the stator cross-section and mounting bolt pattern shared across compatible gearheads and flanges.
Auxiliary features support safe stopping and long service life. An integrated blocking brake applies 3.0 Nm of torque when the drive removes excitation, allowing vertical or suspended axes to hold load weight without external clamps. The shaft interface is a plain shaft, permitting direct coupling with collets or clamp hubs and avoiding keyway stress concentrations during rapid reversals. A dedicated shaft seal sits behind the front bearing to prevent lubricant egress and to keep spray or fine dust from entering the stator air gap. This sealing arrangement helps protect the winding area during repeated thermal cycling and routine machine operation.
Frequently Asked Questions about MDD065D-N-040-N2L-095GR1:
Q: Does the MDD065D-N-040-N2L-095GR1 motor include a holding brake and what is its torque?
A: The MDD065D-N-040-N2L-095GR1 motor comes equipped with a holding brake that delivers a holding torque of 3.0 Nm.
Q: What motor feedback type does the MDD065D-N-040-N2L-095GR1 provide?
A: This motor uses digital servo feedback (DSF) for precise position and speed control.
Q: What is the nominal speed of the MDD065D-N-040-N2L-095GR1 synchronous motor?
A: The MDD065D-N-040-N2L-095GR1 has a nominal speed of 4000 min⁻¹.
Q: What is the centering diameter of the MDD065D-N-040-N2L-095GR1 motor?
A: The centering diameter for this model is 95 mm, assisting in accurate alignment during installation.
Q: What shaft configuration does the MDD065D-N-040-N2L-095GR1 motor have?
A: This motor features a plain shaft with a shaft seal, offering a standard configuration without a side B shaft end.
