Product Description:

The MDD065D-N-040-N2L-095GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, the unit converts commanded electrical output into precisely regulated mechanical motion, making it suitable for pick-and-place axes, packaging machinery, and other industrial automation tasks that require accurate velocity and position control. Its synchronous design supports smooth response to changing load conditions during closed-loop operation.

This motor develops a continuous stall torque of 2.7 Nm, so the drive can maintain load at zero speed without overheating. Under rated excitation, it reaches a nominal speed of 4000 rpm, allowing fast indexing when cycle time is critical. Accurate mechanical registration during mounting is aided by the 95 mm centering diameter, while standard balancing limits residual vibration. Power and feedback lines exit on side A, and the sealed connector interface simplifies cable exchange during service. The rotor and stator follow the compact frame used across the series. A plain shaft transmits torque directly to couplings or pulleys without keyways, and the standard housing supports natural convection cooling for continuous duty.

Torque retention during power-off is provided by an integrated blocking brake rated at 3.0 Nm, eliminating the need for external clamps on vertical loads. Commanded motion and actual position are synchronized through Digital servo feedback (DSF), which supplies absolute rotor data to the drive controller. A tightly fitted shaft seal helps prevent oil or dust ingress into the bearing set, and the shaft end is supplied without a rear extension to conserve cabinet depth. The compact 065 frame and the extended body indicated by the D length code provide higher continuous output while preserving a small footprint.