Product Description:

The MDD065D-N-040-N2L-095GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for integration with digital drive controllers, the unit converts controlled electrical input into precise mechanical rotation for indexing tables, pick-and-place axes, and similar automated stations. Its construction follows the series' modular scheme, so the length code D stator, a standard housing, and a single centering flange support installation in machine layouts that use this frame pattern.

Under continuous stall conditions, the motor delivers 2.7 Nm of torque for holding or low-speed feed motions without exceeding thermal limits. During dynamic operation, it can reach a speed ceiling of 4000 rpm, matching drive stages that supply regulated high-frequency current for rapid point-to-point moves. A centering diameter of 95 mm aligns the stator to planetary gearboxes or bell housings and helps keep radial runout within tolerance. Power and feedback conductors exit on side A, which can simplify cable routing when control cabinets are placed beside the motor shaft. Position data are transmitted through digital servo feedback, so the controller receives high-resolution incremental and absolute information without auxiliary encoders. Standard dynamic balancing keeps vibration low, and a molded connector couples quickly to preassembled cable sets.

The rotor is supplied without a blocking brake, so external clamping devices must handle power-off holding duties. A plain shaft with a standard single-ended configuration accepts couplings or pulleys, while the factory-installed with a shaft seal arrangement helps keep lubrication splash and fine dust out of the bearing cavity. Because the frame uses motor size 065, its compact diameter suits multiaxis gantries where adjacent motors share tight center distances. Standard housing finish and standard balancing support reliable service in clean industrial environments.