Product Description:

The MDD065C-N-060-N2M-095PR0 is a synchronous servo motor built by Bosch Rexroth Indramat and listed in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it transforms controlled current into rotational motion for precision axes, handling stations, and packaging modules. A compact 065 frame and length code C housing let the unit mount close to loads, which shortens mechanical couplings and improves response. Standard dynamic balancing minimizes vibration, and a sealed housing supports operation in typical industrial shop-floor environments.

The motor produces a continuous standstill torque of 2.1 Nm, providing the holding force needed for positioning tasks when motion is paused. During operation, it can reach a nominal speed of 6000 rpm, allowing high throughput on fast indexing stations. Accurate mechanical alignment with adjacent components is simplified by a centering diameter of 95 mm. Power and feedback conductors exit on the right side through a single connector, which simplifies cable routing inside compact enclosures. Contaminant ingress is limited by a shaft seal, so the bearing set retains lubricant when the motor is installed in environments that contain cutting fluid or airborne dust.

A keyway shaft end is factory machined to transfer torque without slip to couplings or pulleys, and the absence of a side-B extension keeps the package short. Position data is delivered by an integrated multi-turn absolute encoder, and that signal is returned to the drive via digital servo feedback for closed-loop velocity and torque regulation. The encoder system can retain position information across multiple shaft revolutions, which supports axes that need a known position after a restart. Because the unit is supplied without a blocking brake, vertical loads must be held by external clamping devices or drive torque during power-off events.