Product Description:

Bosch Rexroth Indramat’s MDD065C-N-060-N2M-095PL1 is a synchronous servo motor in the MDD Synchronous Motors series. The model serves as a motor for digital drive controllers, supplying controlled torque and speed to compact automation axes. When paired with a compatible drive amplifier, it supports closed-loop motion for indexing tables, small gantries, and light spindle applications that require rapid reversals and repeatable positioning. Its synchronous design helps the drive maintain accurate rotor control during acceleration, deceleration, and steady-state operation.

The motor has a standard housing and standard balancing, and it reaches a nominal speed of 6000 rpm. Its continuous torque at standstill is 2.1 Nm, which supports stable holding force for static loads. A centering diameter of 95 mm positions the stator accurately on the machine frame, while the power and feedback exits are on the left side to simplify cable routing near adjacent axes. The electrical interface uses a sealed connector rather than flying leads, and the built-in blocking brake can apply 3.0 Nm of torque to prevent drift during power-off. This arrangement keeps the connection point compact and avoids loose cable entries at the housing.

Position data is captured by an integrated multiturn absolute encoder and returned to the drive through digital servo feedback (DSF), so the control loop can track multiple rotations without external reference marks. The encoder system retains position information across several revolutions, which can reduce the need for a separate homing move after startup. Because the unit includes a blocking brake, vertical axes can be held at standstill without continuous drive current. The rotating element uses a keyway shaft with a shaft seal to limit lubricant escape and particle ingress, and the single-ended shaft on side A reduces the installation depth required at the opposite end.