Product Description:

The MDD065C-N-060-N2M-095PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded electrical input into controlled rotary motion for automated axes. This makes the motor suitable for packaging, assembly, and small machining stations that require fast indexing, accurate positioning, and steady closed-loop motion. The encoder interface allows the connected drive to monitor rotor position during operation so speed and position can be corrected in real time.

The motor is rated for a nominal speed of 6000 rpm, which supports rapid cycle sequences in compact automation equipment. At standstill, it can deliver 2.1 Nm of continuous torque, which supports holding force during servo lock without exceeding its continuous thermal range. A 95 mm centering diameter helps align the motor housing with the machine interface and reduces mounting runout. All power and signal conductors exit on Side B, and the detachable connector supports straightforward cable attachment. The 065 frame size with C length keeps the motor compact for moving assemblies, and the standard housing provides basic protection against common shop contaminants.

A keyway shaft provides a positive mechanical connection to pulleys, couplings, or gearheads. An integrated multi-turn absolute encoder retains position information across power cycles, and digital servo feedback (DSF) sends that data to the drive for closed-loop control. A fitted shaft seal helps keep lubricant and debris away from the stator cavity during extended operation. The motor is supplied without a blocking brake, so any holding function during power-off conditions must be provided externally. The drive-side shaft end uses the standard form, and there is no secondary shaft at the non-drive end.