Product Description:

The MDD065C-N-060-N2M-095PA1 is a three-phase permanent-magnet servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it provides controlled torque and speed for pick-and-place units, packaging stations, and light machining centers. Because it is intended for digital controllers, the motor responds to current commands with stable torque during indexing, feeding, and positioning moves. It uses a size 065 frame with a standard housing, standard balancing, and a keyed single-ended shaft.

The motor reaches a nominal speed of 6000 rpm, allowing high continuous operating speed in compact servo axes. At standstill, it can deliver 2.1 Nm continuously, so torque remains available while the axis holds position between moves. A blocking brake on the rear frame resists up to 3.0 Nm when engaged, which helps prevent vertical or suspended loads from drifting after power is removed. Rotor position is provided through Digital servo feedback (DSF), and absolute position comes from an integrated multi-turn absolute encoder, allowing closed-loop operation without a homing run after startup. That combination supports both commutation control and stored position tracking during machine restarts.

A centering diameter of 95 mm and frame size 065 support installation on compact couplings and many small gearheads. Power, brake, and feedback leads exit on Side A through a sealed connector, keeping cable routing on one face of the motor and helping in tight machine spaces. A shaft seal helps protect the bearing area from dust and coolant, and the keyed shaft supports direct connection to matching hubs. The C length code indicates the active motor length used in this frame, which helps keep the motor compact while maintaining the torque capability associated with this model.