Product Description:

The MDD065C-N-060-N2M-095GR0 synchronous servo motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for digital drive controllers, it converts inverter-supplied AC power into tightly regulated rotary motion for positioning tables, indexing spindles, and compact transfer axes. A permanent-magnet rotor and sealed housing support reliable operation in cabinets where space and cleanliness are critical. This motor type is well suited to applications that require smooth acceleration, accurate stopping, and repeatable motion during frequent start-stop cycles.

The motor has length code C, which indicates the active stack height, while standard rotor balancing keeps vibration within ISO limits. A centering diameter of 95 mm helps align the flange during mounting. Continuous torque at standstill is 2.1 Nm, indicating the load it can hold thermally without forced cooling. The nominal operating speed reaches 6000 rpm, so light-inertia shafts can accelerate and reverse rapidly. Power and signal leads exit from the right side, and all conductors are grouped in a single industrial connector. This arrangement keeps the connection area compact and supports tidy cable routing where installation space is limited.

Position information is generated by an integrated multi-turn absolute encoder, which provides absolute position data over successive revolutions. Size code 065 indicates a compact stator diameter for smaller motion axes. The motor is supplied without a blocking brake, so static holding force must come from the amplifier or an external clamp when power is removed. A shaft seal helps protect the bearing area from contamination, and the plain shaft is furnished without a side B extension to reduce overhung load. The motor uses digital servo feedback for closed-loop communication with the controller, allowing position and speed signals to be processed during operation.