Product Description:

The MDD065C-N-060-N2M-095GL0 is a synchronous motor produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated drive current into mechanical rotation for positioning and velocity tasks in automated machinery. The unit fits compact axes where high speed and moderate torque are required. This makes it suitable for assembly lines, packaging machines, and similar motion platforms that need accurate rotary movement in a limited installation space. Its synchronous operating principle also supports stable motion response when it is paired with a compatible servo controller.

At the mechanical interface, the centering pilot measures 95 mm, allowing accurate seating against the mating flange and helping limit runout. The motor can generate a continuous standstill torque of 2.1 Nm, so it can hold a load at zero speed under the stated operating conditions. During operation, the rotor reaches a nominal velocity of 6000 rpm, and this high base speed suits light-inertia tooling that benefits from rapid acceleration. Rotor position is monitored by an integrated multiturn absolute encoder, and the servo loop receives this data through digital servo feedback, giving the drive controller absolute position after power cycles. For applications that rely on external mechanical locking devices, the unit is supplied without a blocking brake, which helps reduce overall mass and inertia. The power and feedback plugs are oriented to the left side to simplify cable routing in tight cabinets.

The output shaft is a plain shaft that follows the housing outline and omits a side-B extension, making direct coupling straightforward. Electrical terminations are made through a keyed connector that matches the MDD family pinout and provides a secure connection to the drive. The motor is built with a shaft seal, which helps limit oil and dust ingress at the rotor interface. Size code 065, length code C, and the housing profile keep the motor compact while preserving the left-hand connection direction used in vertical mounting frames. The compact outline also helps the motor fit closely spaced axes and guarded enclosures.