Product Description:

The MDD065C-N-060-N2M-095GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for closed-loop, digitally controlled drive systems. It belongs to the MDD Synchronous Motors series and converts commanded current from the drive into rotary motion for positioning or speed-controlled axes in automated equipment. This arrangement lets the motor respond accurately during acceleration, steady running, and hold phases where consistent feedback is important for axis control.

The motor reaches a nominal speed of 6000 rpm, allowing rapid indexing when paired with a compatible inverter. At standstill, it can hold a continuous torque of 2.1 Nm, which supports stable low-speed operation and helps match the motor to the intended load. A centering diameter of 95 mm aligns the housing to the machine frame, and standard dynamic balancing helps keep vibration under control during rotation. Power and feedback conductors exit on Side A through a sealed connector, which keeps cable routing concentrated at one end of the motor. Command data is transferred through Digital servo feedback (DSF), so the drive can maintain precise speed and position control. The housing and shaft seal use the standard version for general industrial installations where routine protection against airborne contamination is needed.

An integrated multi-turn absolute encoder reports shaft position across multiple revolutions, so the control system retains position information after a power interruption. The rotor uses a plain shaft with a standard single-ended geometry for direct coupling to the driven mechanism. The motor has size 065 and length code C, which describe the housing envelope for installations with limited space. The shaft end does not include a secondary extension on side B, which helps keep the overall motor length shorter. The unit is delivered without a blocking brake, so any holding function at standstill must be provided by the drive or by external machine hardware.