Product Description:

The MDD065C-N-060-N2L-095PR1 is a motor for digital drive controllers manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. This servo unit accepts commanded current from the drive. It converts that input into controlled rotary motion for industrial positioning, clamping, and transport tasks inside automated equipment. The motor works as the electromechanical output element in closed-loop servo systems. It is intended for machine axes that need smooth acceleration, controlled holding, and repeatable response during frequent start-stop operation.

At standstill, the motor delivers a continuous torque of 2.1 Nm, allowing it to hold loads without exceeding thermal limits. Its rated shaft velocity reaches 6000 rpm, supporting fast cycle times when paired with a matching inverter. A centering diameter of 95 mm aligns the stator housing on the machine frame, while size code 065 identifies the outer envelope used for this frame. Wiring emerges on the right side, and power and sensor leads terminate on a connector interface that keeps cable routing compact. The motor also uses a single-ended shaft, standard rotor balancing, and a standard housing, which helps it fit neatly into compact assemblies where mounting accuracy and orderly cable exits matter.

An integrated blocking brake provides 3.0 Nm of static holding torque, and a shaft seal helps prevent grease or coolant from migrating along the journal during washdown or oil-mist exposure. Position information is returned to the drive through Digital servo feedback (DSF), enabling high-resolution commutation and continuous monitoring of rotor position. This feedback method lets the controller correct position and speed deviations during motion. Rotor length identifier C indicates a longer active stack than shorter motor lengths in the same frame. The output shaft is machined with a keyway so pulleys or couplings can lock positively to the axis.