Product Description:

The MDD065C-N-060-N2L-095PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is intended to deliver precise rotary motion to automated machine axes that rely on closed-loop electronic control. The unit uses a size 065 frame and a standard housing, allowing direct mounting in compact machinery where high-speed positioning is required while remaining compatible with Indramat drive modules. This configuration suits feed axes, handling units, and other precision mechanisms that need repeatable rotary motion in limited installation space.

Mechanical output includes a continuous standstill torque of 2.1 Nm, which indicates the static torque available without additional cooling. During motion, the rotor can reach a nominal speed of 6000 rpm, supporting short cycle times in indexing or spindle applications. Accurate alignment to adjacent components is aided by a centering diameter of 95 mm. The motor has length code C, which uses an extended stator stack to increase torque density compared with shorter versions. Internal components are balanced to a standard grade to keep vibration low at high speed, and the housing follows the standard series design. Standard balancing also helps maintain smoother running during rapid accelerations and decelerations.

Electrical integration is simplified by a plug-in connector mounted on the left side, so power and feedback cables can be routed in the specified direction. Position information is returned through digital servo feedback (DSF), allowing the drive controller to correct velocity and position in real time. The single-ended shaft uses a keyway for torque transmission and includes a shaft seal to limit lubricant escape and particle ingress. Because the motor is supplied without a blocking brake, any hold-position requirement must be handled by external clamping or drive-produced torque. The shaft end is the standard version without a side B extension. This arrangement keeps the motor suitable for installations that rely on a standard single-ended shaft layout.