Product Description:

The MDD065C-N-060-N2L-095PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, the motor converts controlled electrical energy into precise rotary motion for automated machinery. Its compact frame, standardized shaft, and integrated feedback devices support indexing tables, pick-and-place axes, and packaging spindles that require repeatable speed and torque control. The motor is intended for closed-loop operation, so the connected drive can monitor rotor position while maintaining stable motion.

This model uses size code 065, giving a stator diameter that keeps mass moderate while supporting dynamic loading. At rated excitation, the rotor reaches a nominal speed of 6000 rpm, which suits fast repositioning on short-stroke axes. Continuous standstill torque is 2.1 Nm, allowing the motor to hold load through the drive without excessive heating. Mounting accuracy is maintained by a centering diameter of 95 mm, which helps align the flange with adjoining machine parts. Power and feedback conductors exit on side B, which can simplify cable routing when the motor nose faces the work area. The leads terminate in a sealed circular connector that helps protect the electrical interface from contamination.

A blocking brake is fitted and provides 3.0 Nm of holding torque for vertical axes or parked loads when power is removed. The output shaft uses a keyway for positive torque transmission and includes a shaft seal to limit splash ingress at the drive end. Length code C indicates an active stack that increases thermal capacity compared with shorter versions in the same frame. Digital servo feedback supplies high-resolution position data to the controller, while standard balancing helps reduce vibration during operation. The motor also uses a standard housing, a single-ended shaft, and a connector interface suited to compact motion assemblies.