Product Description:

The MDD065C-N-060-N2L-095GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive current into rotational motion for positioning axes and high-speed spindles in automated machinery. The unit fits installations where compact size and rapid response are needed, linking directly to Rexroth drives through its standard electronic interface.

Its nominal speed reaches 6000 rpm, giving the drive system a wide velocity range before field weakening becomes necessary. At standstill, the motor sustains 2.1 Nm of continuous torque while the stator windings remain within their thermal limit. Standard rotor balancing minimizes residual vibration, and the housing follows the standard build used on other units in the same frame class. The centering diameter is 95 mm, which provides the pilot fit on the mounting flange for precise alignment. Power and feedback conductors exit on the left side through a sealed connector, and position data is returned via digital servo feedback (DSF) so the controller can close the speed and position loops with high resolution. The shaft is supplied as a plain shaft without a secondary end, simplifying coupling selection.

The integrated blocking brake delivers 3.0 Nm of holding torque to secure the load when power is removed, a feature often required on vertical axes. Frame designation 065 keeps the overall diameter small while the length code C increases magnetic stack depth for extra power density. The motor is built with a shaft seal, which helps prevent oil or coolant from entering the front bearing zone and extending service life in contaminated environments. The motor is suited for fast-cycling pick-and-place or packaging stations that require compact servo hardware and quick response.