Product Description:

The MDD065C-N-060-N2L-095GL0 is a synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for integration with digital drive controllers, the unit converts electrical commands into controlled rotary motion for positioning and velocity tasks in automated machinery such as pick-and-place axes, packaging spindles, and light transfer stations. By matching encoder feedback with drive electronics, it supports closed-loop motion that maintains accuracy over a wide speed range. This operating concept allows the motor to respond quickly to changing load conditions while keeping axis movement stable during repeated production cycles.

At standstill, the motor delivers 2.1 Nm of continuous torque, allowing it to hold loads without overheating during static clamping or slow-speed indexing. Under rated excitation, it reaches a nominal rotational speed of 6000 rpm, so compact machines can achieve high throughput without changing gear ratios. Mounting is assisted by a centering shoulder of 95 mm, which aligns the stator housing concentrically with the mechanical frame to reduce vibration. The rotor extends as a plain shaft, making it compatible with couplings or pulleys that do not require keyways. Because the unit is supplied without a blocking brake, power-off holding must be provided by drive torque or an external mechanism when the application requires it.

Control precision depends on the integrated digital servo feedback encoder that sends position data directly to the drive. Power and signal cables exit on the left side of the housing, a layout that can simplify routing when several motors are installed on a common machine base. The electrical interface uses a sealed connector, so wiring can be disconnected quickly while EMC shielding remains intact. A fitted shaft seal helps prevent lubricant migration along the output journal and protects the motor’s internal bearings in oil-splash or fine-dust environments. This arrangement also supports cleaner cable management in compact installations where available space around the motor is limited.