Product Description:

The MDD065C-N-060-N2L-095GA0 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a motor for digital drive controllers that converts commanded current into precise rotary motion for positioning tasks in automated machinery and handling equipment. When paired with a suitable drive, the unit supports closed-loop speed and torque control for repeatable motion on compact axes. Its compact format makes it suitable for installations where accurate movement must be maintained without using a large motor housing.

The motor reaches a nominal speed of 6000 rpm, which supports short cycle times when the connected load and drive permit full rated operation. At standstill, it can hold or start loads with 2.1 Nm of continuous torque. Rotor position is reported through digital servo feedback, allowing the controller to correct position errors during operation. Precise mounting is aided by a centering diameter of 95 mm. Power and feedback conductors exit on Side A, which helps keep cable routing clear of moving machine elements. The housing uses the standard frame style, and the shaft end is a single-ended design without an auxiliary shaft on side B.

A sealed connector handles the electrical interface, and a fitted shaft seal helps limit dust or fluid ingress along the plain output shaft. The frame is size 065 with length code C, giving the motor a compact shape for closely spaced multi-axis layouts. Mechanical vibration is controlled by standard balancing, which helps reduce bearing load during high-speed operation. The motor is built without a blocking brake, so any holding force after power removal must be provided by external means. This layout suits protected machine enclosures where a plain shaft, sealed electrical connection, and stable running characteristics are required.