Product Description:

Bosch Rexroth Indramat manufactures the MDD065C-N-040-N2M-095PR0, an AC servo motor in the MDD Synchronous Motors series. The unit is intended for use with digital drive controllers so that closed-loop motion axes can be positioned quickly and repeatably in automated machinery. By converting electrical power into controlled mechanical rotation, it supports tasks such as indexing tables, pick-and-place heads, or light conveying stages where accurate velocity and torque regulation are required. Its compact 65 mm frame size keeps inertia low, allowing responsive acceleration profiles inside tight machine spaces.

A centering diameter of 95 mm aligns the flange precisely on mounting plates. Power and feedback wiring exit on the right side because the connection hardware is located on that face, and a sealed connector simplifies disconnection. Under continuous stall conditions, the motor can deliver 2.1 Nm of torque without overheating. Rotor position is monitored by an integrated multiturn absolute encoder, so the controller can retain shaft position after power cycles without a homing routine. Balancing and housing are both supplied in a standard grade for general industrial use.

Feedback is transmitted through Digital servo feedback (DSF), giving the drive high-resolution incremental and absolute signals. During motion, the rotor can reach 4000 rpm, providing a useful speed range for light tooling or feed axes that require fast positioning. The shaft is machined with a keyway, and a shaft seal is fitted to help guard against oil ingress along the journal. Because the motor is supplied without a blocking brake, external mechanical holding devices must be used when vertical loads are present. The C-length body and single-ended shaft keep mass low while maintaining sufficient thermal capacity for intermittent duty cycles.