Product Description:

The MDD065C-N-040-N2M-095GR0 is a servo motor from the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. Designed for use with digital drive controllers, it converts commanded current into controlled torque and speed for axis modules in industrial automation cells. This arrangement supports repeatable rotary motion in feed handling, pick-and-place equipment, and other machines that require accurate response in a compact motor package. Its compact frame and standardized interfaces help it fit cleanly into multi-axis machinery without requiring a large installation footprint.

The motor provides a continuous standstill torque of 2.1 Nm, which gives the axis stable holding torque during dwell periods. Its nominal speed reaches 4000 rpm, making it suitable for light-duty gantries and test rigs that require fast response. A centering diameter of 95 mm helps align the motor with couplings or gearboxes. Position data comes from an integrated multi-turn absolute encoder and is transmitted through digital servo feedback (DSF) so the controller can maintain accurate position and velocity loops. This feedback arrangement supports controlled motion during acceleration, deceleration, and precise positioning tasks.

Mechanical integration uses standard balancing to limit residual vibration, and the standard aluminum housing uses a C-length stator body for the 065 frame size. Power and feedback connectors are oriented to the right, which helps keep cable routing consistent when motors are mounted in series. The terminals are fitted to a sealed connector for protected electrical connection in enclosed machine assemblies. The output uses a plain shaft with a shaft seal to protect internal bearings from coolant splash and help limit lubricant escape. The motor is supplied without a blocking brake, so load holding during power-off conditions must come from drive torque or an external clamp.