Product Description:

The MDD065C-N-040-N2M-095GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into controlled mechanical rotation for positioning tables, handling modules, and similar industrial automation axes. In automated systems, it serves as the rotary output element for indexing stations, feed axes, and transfer mechanisms that rely on precise motion control. The housing, balancing, and shaft configuration follow the standard options for this frame size, giving machine builders a compact rotary actuator that integrates directly with compatible drive electronics.

The mechanical interface includes a centering diameter of 95 mm, which provides an accurate register fit between the motor flange and the machine base. Standard dynamic balancing reduces residual vibration during rotation, which supports smoother operation on coupled loads. Electrical power and feedback lines exit on the left side through a single connector that matches the specified connection type. Under rated excitation, the rotor reaches a nominal speed of 4000 rpm and can continuously generate 2.1 Nm of torque at standstill. A blocking brake is fitted and supplies 3.0 Nm of holding torque when drive power is removed. This brake function helps keep suspended or vertical axes from drifting when the motor is not energized.

Position data is returned through digital servo feedback (DSF) working together with an integrated multi-turn absolute encoder, so the controller can recover shaft position after a power cycle without an external reference move. The output uses a plain shaft with a shaft seal, which helps protect the internal bearings from coolant splash and fine dust. The motor has size 065 and length code C. The standard housing arrangement without a side B extension helps keep the overall length short for compact machine layouts where cable space and overhang are limited.