Product Description:

The MDD065C-N-040-N2M-095GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion. It is suited for positioning and velocity tasks on automated axes such as pick-and-place gantries or compact tooling spindles. In closed-loop systems, it works with the drive to maintain consistent motion under changing load conditions.

The motor develops a continuous standstill torque of 2.1 Nm, allowing stable holding and low-speed feed without overheating. Its nominal speed is 4000 rpm, so axis planners can specify high traverse rates while staying within the thermal limits of the standard housing and balancing class. Precise concentric alignment is assisted by a centering diameter of 95 mm, which matches typical machine mounting pilots. All power and feedback conductors plug into a rugged connector, so the cables can be disconnected without opening the motor frame. This connection layout keeps the interface compact and avoids loose lead routing at the housing. The standard housing, motor size 065, and length code C give the unit a compact body that still accepts an internal shaft seal to support ingress protection.

A blocking brake supplies 3.0 Nm of holding torque, preventing load drift during emergency stops or power loss. Multi-turn position sensing comes from an integrated multi-turn absolute encoder, while commutation data are passed to the drive through digital servo feedback (DSF). This feedback arrangement allows the controller to track shaft position through repeated indexing and restart conditions. Terminals face side B of the housing, enabling cable routing that avoids moving machine members. Mechanical power leaves the rotor through a plain shaft without a second shaft end, so couplings or pulleys mount directly and run concentrically with the standard balancing class.