Product Description:

The Bosch Rexroth Indramat MDD065C-N-040-N2M-095GB0 is a synchronous servomotor positioned within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into controlled torque and speed for positioning and cyclic motion in automated assemblies, pick-and-place units, and light tooling axes. The manufacturer supplies this model as a compact drive element that connects directly to Indramat drives, allowing closed-loop operation in multi-axis machines where fast response and repeatability are essential.

The motor body uses standard dynamic balancing so vibration remains within ISO limits at its 4000 rpm nominal speed. A centering pilot of 95 mm positions the flange concentrically against gearboxes or mounting plates, reducing runout. Power and feedback conductors exit on side B, an arrangement that favors cable routing toward the rear of compact machine frames. At standstill, the electromagnetic system can deliver 2.1 Nm of continuous torque, providing static holding force without thermal overload. Rotor position is monitored by an integrated multiturn absolute encoder, so the drive retains position over power cycles without external referencing.

Feedback data returns to the controller as digital servo feedback, eliminating analog offset errors and supporting high-gain loops. The motor has a plain shaft and is supplied with shaft seal, helping keep lubricant inside the standard housing in spraying coolant environments. The motor size code 065 with length code C gives it a compact stator stack that limits mass while accommodating the winding required for the stated torque. Electrical connection is through a single circular connector, and the unit has no blocking brake, so an external holding device is required when the axis must remain fixed at standstill. The shaft end is provided only on the drive side, shortening overall length and simplifying coupling.