Product Description:

The MDD065C-N-040-N2M-095GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. As a motor designed for digital drive controllers, it converts electrical commands from the drive into precise rotary motion for tooling, handling, and packaging axes in factory automation. Its integrated multi-turn absolute encoder returns position data directly to the controller, enabling closed-loop positioning without external sensors. A blocking brake is installed to secure the load when power is removed, which improves safety on vertical or suspended axes.

At standstill, the rotor can deliver a continuous torque of 2.1 Nm, allowing stable force holding under rated thermal limits. During nominal operation, the shaft can reach 4000 rpm, matching drive outputs that favor high-speed indexing cycles. A mechanical holding brake provides up to 3.0 Nm of static torque so loads remain fixed when motion is disabled. Position data is exchanged through Digital servo feedback (DSF), which transmits absolute angle information with high resolution for tight speed control. Accurate centering during installation is aided by a flange pilot of 95 mm, which helps keep the stator concentric with connected machine frames.

Connection hardware is oriented on side A, so power and feedback plugs exit the housing toward the drive cabinet for straightforward cable runs. The motor uses a keyed circular connector interface, which simplifies cable attachment and maintains secure mating. Motion is transferred through a plain shaft, which is suitable for couplings or gearboxes that do not require a keyway. A factory-installed shaft seal protects the front bearing against lubrication washout and coolant spray. The rotor uses the standard balancing grade to help maintain smooth running during operation.