Product Description:

The MDD065C-N-040-N2L-095PB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled electrical energy into rotational motion for positioning or feed tasks in automated machinery. When paired with a compatible drive amplifier, the unit supports precise velocity and torque control in packaging, handling, and light machining axes. This arrangement allows the drive to regulate acceleration, holding, and reversal with consistent response. Its design follows the 065 frame code used in this motor family.

At standstill, the motor develops a continuous torque of 2.1 Nm, allowing it to maintain loads without thermal overload when current is limited by the drive. A nominal speed rating of 4000 rpm supports rapid indexing cycles and high commanded shaft speed under rated conditions. Rotor position is reported through digital servo feedback (DSF), which supports closed-loop control and electronic commutation. Accurate installation is assisted by the 95 mm centering diameter, which helps align the housing on the machine face. Power and feedback conductors are combined in a single connector, reducing separate cable entries and keeping the motor interface compact.

The connection hardware is located on side B, routing cables away from the driven shaft and simplifying machine layout where the coupling area must remain accessible. Torque is transmitted through a keyway, and a shaft seal protects the front bearing from coolant splash and dust. Because the unit is supplied without a blocking brake, holding torque must be provided by the drive or by external mechanics whenever the axis is stationary. The motor has a single shaft end, so the non-drive side does not carry a second output shaft. That layout helps keep the overall length compact for confined mounting spaces.