Product Description:

The MDD065C-N-040-N2L-095GL1 is an AC synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated three-phase power from an Indramat drive into precise rotary motion for positioning or speed-controlled tasks on automated assembly lines, pick-and-place modules, or packaging stations. Its design fits the dynamic response and compact footprint required in multi-axis systems. This makes it suitable for axes that must start, stop, and settle quickly during repetitive production cycles.

The mechanical interface starts with a centering diameter of 95 mm, providing precise axial alignment on mating housings. Cables exit on the machine's left side because the connection hardware is mounted there and uses a detachable connector. At standstill, the rotor supplies 2.1 Nm of continuous torque, while commanded speed can reach 4000 rpm for fast indexing. These values correspond to frame size 065 with length code C. A standard balancing quality helps control vibration, and the standard housing style matches other motors in the series. The side-mounted connection also helps route cables away from the driven load in compact installations.

Static holding requirements are met by an integrated blocking brake that clamps the shaft with 3.0 Nm of torque whenever supply power is removed. This brake can hold the axis in place when motion is stopped. Closed-loop operation is supported by the built-in digital servo feedback (DSF) transducer, which returns rotor position data to the controller during operation. Drive torque is transferred through a plain shaft that is factory-sealed. A shaft seal guards the bearings against coolant splash or airborne particulates, and the shaft is provided only on side A so no secondary stub is present.