Product Description:

The MDD065C-N-040-N2L-095GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. The motor is intended for use with digital drive controllers that regulate current, speed, and position in a closed loop. It converts controlled electrical energy into precisely regulated mechanical rotation for industrial automation tasks such as feed axes, handling units, and positioning systems. With motor size 065 and length code C, the unit occupies a modest footprint while supporting the thermal load expected in dense multi-axis cells. Its standard housing and factory balancing allow direct integration into machines without further modification.

At standstill, the rotor can deliver 2.1 Nm of continuous torque, supporting position holding at zero speed under rated operating conditions. During motion, the winding supports operation up to 4000 rpm, which allows direct coupling to high-speed ball screws or belt pulleys. The flange has a centering pilot of 95 mm for accurate alignment with gearboxes or machine plates. Power and feedback cabling exit on Side A, and the single-piece Connector interface keeps the connection compact while maintaining enclosure integrity. This cable direction can simplify routing when the motor is mounted with the flange facing the load.

For power-off safety, the integrated blocking brake supplies 3.0 Nm of static holding torque, which helps prevent vertical axes from drifting when the inverter is disabled. Position information is provided by the Digital servo feedback module, so the controller receives the feedback signals needed for closed-loop operation during positioning and speed regulation. The output member is a Plain shaft produced to ISO fits, and it uses a shaft seal on the drive end to limit lubricant migration and dust ingress. The shaft end on side B is omitted, which shortens the overall length and avoids unused overhang.