Product Description:

The MDD065B-N-060-N2M-095PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated electrical power into precise rotary motion for positioning and speed-controlled axes in automated machinery. The model’s compact frame and standard housing make it suitable for machinery that needs high-speed feedback and moderate torque within confined mounting spaces. Its integrated feedback system allows the connected drive to correct position and speed deviations during dynamic motion.

The unit delivers a continuous standstill torque of 1.5 Nm, allowing the drive to hold loads without overheating. Its rated speed reaches 6000 rpm, enabling fast cycle axes. The active section uses size code 065 with length code B, and the centering pilot measures 95 mm for accurate alignment during installation. Power and feedback connectors exit on side B, which can simplify cable routing in compact machine layouts. Standard balancing limits vibration. The motor uses a standard housing without auxiliary cooling, a single circular connector handles wiring, and digital servo feedback reports rotor position to the controller.

For holding functions, the motor is supplied with a blocking brake that clamps the shaft with 3.0 Nm of static torque, preventing axis drift during power loss or an emergency stop. A shaft seal sits behind the front bearing to restrict lubricant escape and dust ingress, and the output end uses a keyway so torque can be transmitted through keyed couplings without slip. Multi-turn position data is provided by the integrated multiturn absolute encoder, which removes the need for a homing move after shutdown. The shaft end on side B is omitted to save length, and the standard connector orientation helps maintain the motor’s sealing.