Product Description:

The MDD065B-N-060-N2M-095GR0 synchronous servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Intended for integration with digital drive controllers, it converts controlled inverter current into precise rotary motion for machine tools, pick-and-place stages, and packaging axes. Its 065 frame and B length code suit tight mechanical envelopes while still supporting the fast response expected in automated equipment. This layout helps the motor fit compact axis designs where accurate speed and position control are required through frequent start-and-stop motion.

The mechanical interface uses a centering diameter of 95 mm, which aligns the flange accurately against gearboxes or mounting plates. Continuous standstill torque is rated at 1.5 Nm, so the motor can hold a steady load at zero speed within its thermal capability. A nominal shaft speed of 6000 rpm supports short cycle times when the drive commands high motor speed. Power and feedback conductors terminate through a right-side connector, and cable routing remains on the right to suit machine layouts with a common cable track. Closed-loop operation relies on digital servo feedback, allowing the drive to regulate current, speed, and position without external feedback hardware.

An integrated multi-turn absolute encoder reports position over many revolutions, so the control system can retain location information after power is restored. The output uses a plain shaft with a shaft seal to support coupling installation while helping keep contaminants away from internal bearing areas. The motor is supplied without a blocking brake, so any holding function for a vertical or suspended load must come from the drive or from external hardware. The shaft end is provided on side A only, the connection direction is right, and the internal rotating parts are balanced to the standard class to limit vibration during normal operation.