Product Description:

Bosch Rexroth Indramat manufactures the MDD065B-N-060-N2M-095GL0 in its MDD Synchronous Motors series. Supplied as a motor for digital drive controllers, this compact AC servo unit is intended for systems where accurate torque and speed regulation are required in packaging lines, handling units, and small positioning stages. By pairing with digital drive controllers, the motor translates electrical commands into repeatable rotary motion, allowing precise axis control within industrial automation cells. It fits easily inside tight cabinets and compact machine layouts thanks to its moderate frame size.

The nominal operating speed reaches 6000 rpm, letting a controller command high peripheral velocities without overspeeding connected mechanical elements. At standstill, it can deliver 1.5 Nm continuously, providing holding force for light loads during dwell periods. Accurate concentricity is helped by a centering flange diameter of 95 mm, while the rotor is ground to a standard balancing grade that minimizes vibration at full speed. Feedback is exchanged through digital servo feedback signals routed to the drive via a sealed connector that exits on the left side of the housing. Frame size 065 and length code B determine the overall body length, and the housing uses the standard version.

Position information is resolved internally by an integrated multi-turn absolute encoder, removing the need for external homing routines after power cycling. Because the design is supplied without a blocking brake, any static holding must be achieved by the drive or external mechanics, which suits continuously moving axes and positioning tasks that do not require brake holding. Contamination ingress is limited by a with a shaft seal arrangement that works together with the plain shaft geometry and the standard single-sided shaft end that omits a second output side.