Product Description:

The MDD065B-N-060-N2L-095PL0 is a synchronous servo motor built by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. It belongs to the MDD Synchronous Motors series and converts electrical drive commands into precise rotary motion for positioning and speed-controlled tasks on production lines and handling equipment. A standard housing encloses the electromagnetic assembly, and the motor is supplied without a blocking brake, so any holding requirement must be provided by the drive or by external mechanical means. Standard dynamic balancing supports smooth operation, while an integrated shaft seal helps protect the internal bearings from airborne oil and dust.

At standstill the motor can produce a continuous torque of 1.5 Nm, allowing it to hold a steady load without exceeding thermal limits. Under rated excitation it reaches a nominal speed of 6000 rpm, which supports fast cycle times on light-duty axes and other compact motion systems. The centering diameter is 95 mm, providing a precise reference surface for concentric mounting on gearboxes or adapter plates. Power and feedback cables connect on the left side through a sealed connector, which keeps the wiring arrangement compact and helps protect the connection point from contamination.

The motor has size 065 and length code B, a combination that keeps mass and rotor inertia low for responsive acceleration and deceleration. The output shaft has a keyway and is provided only on side A, while side B remains closed to keep the housing short. Position data are returned to the controller through integrated digital servo feedback, allowing closed-loop regulation without a separate external encoder. This arrangement supports accurate speed and position control in compact machine assemblies where installation space is limited.