Product Description:

The MDD065B-N-060-N2L-095PA1 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it delivers closed-loop rotary motion to indexing tables, pick-and-place axes, and other precision stations in automated lines. Its design pairs with Rexroth drive amplifiers so that commanded current is converted directly into controlled shaft position, speed, or torque, making the motor suitable for repeatable motion where accurate response and compact installation are important.

Several mechanical and electrical parameters describe how the unit performs in service. A nominal speed of 6000 rpm sets the upper continuous operating velocity under rated supply and cooling conditions. At standstill, it can hold a continuous torque of 1.5 Nm, allowing low-inertia loads to remain clamped during dwell periods. Mounting alignment is guided by a 95 mm centering diameter, and the rotor uses standard balancing quality to reduce residual vibration at high speed. Digital motion feedback is provided through digital servo feedback (DSF), supplying the drive with absolute position data for tight speed and position loops. Power is transmitted through a shaft machined with a keyway, which helps prevent slip between the motor and the driven hub.

A blocking brake inside the housing supplies 3.0 Nm of holding torque to secure vertical or suspended loads after power is removed. Power and feedback leads exit on Side A through a sealed connector interface, and a shaft seal helps keep contaminants out of the bearing cavity during routine machine operation. The motor has frame size 065 with length code B and the series' standard housing finish, which supports installation in compact servo assemblies. It has no shaft end on side B, and the terminal uses a connector-style design for orderly cable routing.