Product Description:

The MDD065B-N-060-N2L-095PA0 synchronous motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for direct connection to digital drive controllers, it converts controlled current into mechanical rotation for small handling devices, indexing tables, and auxiliary packaging axes. The motor uses a permanent-magnet rotor and closed-loop feedback so automation systems can command precise torque, speed, and position while maintaining consistent cycle times.

At standstill the machine can deliver 1.5 Nm of continuous torque, which shows how much load the axis can hold without overheating during static positioning. Under dynamic operation it reaches a nominal speed of 6000 rpm, allowing fast indexing when paired with high-frequency drive pulses. Its frame is size 065 with length code B, a combination that helps keep mass and inertia low for quick acceleration. Electrical power and feedback conductors exit on Side A through a single industrial connector, simplifying cabinet routing. Motion data are returned to the controller via digital servo feedback, giving position information needed for synchronized multi-axis movement. Standard balancing minimizes vibration, and the standard housing provides basic protection inside a cabinet.

The flange has a centering diameter of 95 mm, enabling accurate alignment with gearboxes or machine frames. The shaft is equipped with a shaft seal to limit the ingress of coolant or dust, and the metric output end uses a keyway so pulleys or couplings can be mounted without slip. Because the unit is supplied without a blocking brake, holding loads after power removal requires drive torque or an external clamping device. A standard shaft end on the drive side and the absence of a side-B extension reduce overhang forces, while the connector interface preserves the motor’s IP rating when used with compatible cables.