Product Description:

The MDD065B-N-060-N2L-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it converts drive current into rotary motion for positioning, indexing, and velocity control tasks on automated production lines. Its compact build allows integration into multi-axis assemblies where space and dynamic response are critical.

At standstill, the rotor can deliver a continuous torque of 1.5 Nm, which is the sustained load the shaft can hold without thermal overload. Once energized, the windings and magnetic field support a nominal speed of 6000 rpm, enabling high peripheral velocities in lightweight tooling. A centering diameter of 95 mm provides the reference surface that aligns the motor housing with mating machine plates and helps keep radial runout within tolerance. Electrical and feedback conductors exit through a connection on the left side, which can simplify cable routing inside compact cabinets. Position and velocity data are returned by the integrated digital servo feedback system, allowing the connected drive controller to close fast control loops. Standard circular connectors are used for both power and encoder lines.

Dynamic balance is maintained through standard balancing, reducing residual vibration when the shaft accelerates. For machines that operate in dusty or coolant-rich zones, the output flange includes a shaft seal that limits ingress along the plain shaft. The motor is supplied without a blocking brake, so any holding function must be provided by the drive or external mechanics. Frame designation 065 and length code B determine the installation envelope used in typical modular axes. The plain shaft is single-ended with no side-B extension, the housing is standard, and all terminations use a keyed connector that helps prevent miswiring.