Product Description:

The MDD065B-N-060-N2L-095GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is described as a motor for digital drive controllers, so it delivers rotary motion that can be regulated precisely in packaging equipment, pick-and-place axes, and other high-speed automation tasks. In this role, it converts electronic drive commands into controlled shaft movement for positioning and speed-controlled operation across repeated cycles. The housing and balancing are both standard, giving the motor a familiar mechanical envelope and a vibration profile suited to general industrial use.

This model develops a continuous torque of 1.5 Nm at standstill, which allows the drive to hold moderate loads during dwell periods without excessive heat buildup. When power is removed, a brake rated at 3.0 Nm keeps the shaft locked so the axis can remain in position. Under commanded motion, the rotor reaches a nominal speed of 6000 rpm for rapid indexing and spindle-related duties where short cycle times are important. Position information is returned through digital servo feedback, giving the controller high-resolution data for velocity and torque control, while a 95 mm centering diameter helps maintain accurate alignment with couplings, gearboxes, or direct-drive loads.

The electrical and service connections are routed on side B of the frame, and the motor uses a connector that combines power and feedback wiring in one interface. This arrangement keeps the connection point grouped at one end of the motor and supports orderly cable routing in compact machine layouts. It is supplied with a plain shaft, so torque is transferred through friction-fit couplings rather than a keyed shaft, which helps minimize backlash in precision axes. The motor also includes an integrated shaft seal, and its 065 frame size with B length code suits compact automation modules while helping protect internal components from dust and splashed oil.